We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Support stand.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Support stand - List of Manufacturers, Suppliers, Companies and Products

Support stand Product List

1～11 item / All 11 items

Displayed results
Insulation Support Material: Bar Holder X (Copper Strip Insulation Support Base)

Insulation Support Material: Bar Holder X (Copper Strip Insulation Support Base)

Lightweight polypropylene! Please use it for supporting low-pressure copper bands.

The "Bar Holder X (Insulated Support for Low-Pressure Copper Strips)" is a product that can support copper strips without drilling holes by sandwiching them from above and below. It features a groove surface of 20mm width intersecting with a groove surface of 11mm width at a right angle, allowing for two different usage methods. Additionally, it can support copper strips with a thickness ranging from 10mm to 20mm, and it is also possible to install two 6mm strips. The width of the copper strip that can be supported ranges from 50mm to 125mm, and for copper strips wider than 75mm, insulated bolts are available. 【Features】 - Can be used without drilling holes for supporting copper strips - Supports by sandwiching from above and below - Allows for two different usage methods - Can support copper strips with a thickness of 10mm to 20mm - Supports copper strips with a width of 50mm to 125mm - Insulated bolts are provided for supporting copper strips wider than 75mm *For more details, please refer to the PDF document or feel free to contact us.

  • B13X.png
  • Board materials
  • Wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating Support Bar Holder S/S-150 (Copper Band Insulating Support Base)

Insulating Support Bar Holder S/S-150 (Copper Band Insulating Support Base)

You can save the effort of manually processing insulation materials! Please use it for supporting low-pressure copper strips. The S-150 is suitable for supporting wide copper strips.

【Features】 1. The copper strip can be fixed by tightening it with mounting bolts to the bar holder S/S-150, allowing for a wide range of thicknesses and widths of the copper strip. 2. It reduces the manual processing time required for conventional insulating materials. 3. A separator can be placed in the middle, allowing for parallel installation of the copper strip from both sides. *For more details, please refer to the PDF document or feel free to contact us.

  • B14-Sex.png
  • B14-S150.png
  • B14-S150ex.png
  • Board materials
  • Wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support material: three-stage support platform

Insulating support material: three-stage support platform

The square nut is already set! It can easily support the copper strip.

The "three-stage support stand" is a product used as a bus support stand for distribution boards and similar applications. It comes with square nuts, making it easy to support copper strips. Additionally, it is lightweight because it is made of resin. 【Features】 ■ Easily supports copper strips ■ Lightweight due to being made of resin 【Material】 Made of ABS resin (black, green) *For more details, please refer to the PDF document or feel free to contact us.

  • B17-1ex.png
  • Board materials
  • Wiring materials
  • Distribution Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support material branch bus support base

Insulating support material branch bus support base

Supports compatible with 1000V! Support base made of engineering plastic with excellent heat resistance and strength.

The "RBS Series" can be used as a bus support for distribution boards, power distribution panels, and other power boards. It is molded from "SPS," one of the lightest resins among engineering plastics, and offers excellent heat resistance and strength. It eliminates the hassle of manually processing insulating materials as in the past. 【Features】 ■ Compatible with 1000V ■ Molded from "SPS," one of the lightest resins ■ Excellent heat resistance and strength ■ Eliminates the hassle of manually processing insulating materials *For more details, please refer to the PDF document or feel free to contact us.

  • B15-1ex.png
  • Other work tools
  • Other terminal blocks

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support material supporter (conductor insulating support base)

Insulating support material supporter (conductor insulating support base)

Excellent insulation properties and lightweight! Ideal for mounting equipment such as distribution boards, control panels, and rectifier panels!

The "Supporter (Low-Pressure Internal Conductor Insulation Support Base)" is used as an insulating base for mounting equipment such as distribution boards, control panels, and rectifier panels, as well as for insulating support for busbar wiring and electrical wiring. It has excellent insulation properties (with a dielectric strength of 2.5kV for 1 minute) and is lightweight. This eliminates the need for manual processing of insulation materials as done traditionally. There are two types available: double-sided nuts (S, T, D types) and nut-bolt combinations (SB, TB, DB types), each with a wide variety of heights and diameters, allowing for use according to specific applications. 【Features】 ■ Eliminates the need for manual processing of insulation materials ■ Two types: double-sided nuts and nut-bolt combinations ■ Excellent insulation properties: dielectric strength of over 22kV for 1 minute ■ Lightweight ■ Can also be used as a branching base by attaching branching hardware *For more details, please refer to the PDF materials or feel free to contact us.

  • B05ex.png
  • B05-1.png
  • B05-1ex.png
  • B05-2.png
  • B05-2ex.png
  • B07-1.png
  • B07-1ex.png
  • Board materials
  • Distribution Board
  • Control Panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support bar holder L (copper strip insulating support base)

Insulating support bar holder L (copper strip insulating support base)

You can save the effort of manually processing insulating materials! Please use it for supporting low-pressure copper strips.

The "Bar Holder L (Copper Strip Insulation Support)" secures the copper strip by tightening it with a mounting bolt, making it suitable for a wide range of thicknesses and widths of copper strips. With a flat bottom, it offers stability and excellent strength. It eliminates the need for manual processing of conventional insulating materials. 【Features】 ■ Secured by tightening with a mounting bolt ■ Usable for a wide range of thicknesses and widths (up to 75mm) ■ Flat bottom provides stability and superior strength ■ Reduces the need for manual processing of conventional insulating materials ■ Also available in flame-retardant (UB type). 【Material】 ■ Made of polypropylene *For more details, please refer to the PDF document or feel free to contact us.

  • B13L-ex.png
  • Board materials
  • Wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support: inclined bus support platform

Insulating support: inclined bus support platform

Easily connect wires! A sloped busbar support that requires minimal installation space.

The "Inclined Busbar Support (RBS-40・RBS-50)" is a product used as a busbar for branch wiring and as a support. Due to the inclined design of the busbar, wire connection work can be done easily, and it requires less installation space. Additionally, the bolt and nut components are treated with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ The busbar is inclined ■ Easy wire connection work ■ Requires less installation space ■ Material: Made of polypropylene (black) 【RBS-40-3U-RO】 ■ This is a relay unit using BS-40. It comes assembled with a mounting bracket, copper bar, and protective cover. *For more details, please refer to the PDF document or feel free to contact us.

  • B16-1ex.png
  • B16-2.png
  • Board materials
  • Wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support material: two-stage support platform

Insulating support material: two-stage support platform

Copper busbars can be arranged in two tiers! A low-voltage internal conductor insulation support stand has been developed for two-wire use, featuring an Embraco-made UL94 V-0 flame-retardant type.

The RBS-45, a two-tier support base (low-voltage internal conductor insulated support base), is used as a grounding support base for ELB and as a support base for copper busbars in distribution boards and control panels. Since copper busbars can be arranged in two tiers, this product can be used to place two grounding bars in close proximity to the ELB in a limited space, especially when it is necessary to distinguish between the grounding bar for ELB and the general use. 【Features】 ■ Low-voltage internal conductor insulated support base ■ Can arrange copper busbars in two tiers ■ Can place two grounding bars in a limited space ■ Material: Made of polypropylene (black) ■ Dielectric strength: 2.5kV for 1 minute without abnormalities 【UL94 V-0 flame-retardant type RBS-96-SPS】 【Features】 1. Molded from "SPS," one of the lightest resins among engineering plastics, offering excellent heat resistance and strength. 2. Eliminates the need for manual processing of insulating materials as in the past. 3. Features a step design for easy wiring management. *For more details, please refer to the PDF document or feel free to contact us.

  • B17-2ex.png
  • B17-2ex2.png
  • B18-1.png
  • B18-1ex.png
  • Board materials
  • Wiring materials
  • Distribution Board

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support for busbar (for low voltage)

Insulating support for busbar (for low voltage)

Please use it as a busbar support for switchboards and similar equipment. Use it as a standalone unit.

【Features】 1. Eliminates the need for manual processing of insulating materials as in the past. 2. Lightweight due to being made of resin. 3. Excellent insulation properties (for low pressure use). 【Material】 Made of polypropylene (black). *For more details, please refer to the PDF document or feel free to contact us.

  • B15-B.png
  • B15-C.png
  • B15-D.png
  • B15-E.png
  • B15-F.png
  • B15-G.png
  • B16.jpg
  • Other work tools
  • Other terminal blocks

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shaft support unit, shaft support base

Shaft support unit, shaft support base

Used in combination with the shaft, housing open unit, and three support points.

The "shaft support base" is used in combination with a shaft, housing open unit, and three support points, making installation easy. The support base is made of aluminum alloy, and the length and mounting hole pitch can be customized. We offer products with shaft diameters ranging from 10 to 30 mm, heights from 18 to 37 mm, and widths from 32 to 60 mm. For more details, please contact us or refer to the catalog.

  • Plastic bearings
  • Metal bearings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.